Joining the FON community means sharing your ADSL.
I strongly agree with this idea. However, since the line is mine, and I Fonera paid , pretend to decide what and when share.
The "how" you can determine the user's homepage limiting the speed limit for the public network.
The "when" you can not decide.
I think you have to leave you to decide. It 's a community this or not? Not to be trusted each other?
not find the right Foneros we should trust each other, but that does not trust the Foneros FON!
The concept is this: I am a Fonero I trust the other Foneros. I have to trust the fact that they are not to use my connection for illegal purposes. I have to trust that you do not use my connection for visiting child porn websites. In these cases I'd be responsible. These things are very serious, but I have to trust.
just can not find, however, that FON does not trust me. I have sold a router "locked" so that I always agree with must and my band. Because I
that at risk "severe" I trust the other and they do not trust me? This
not find a correct policy.
I am willing to share my band. But I want guarantees. Fon And not many guarantees in this regard.
may change the registration system: a Fonero must provide a photocopy of the identity authenticated in any way (it becomes legal in Italy).
could change the login system to monitor traffic or something like that ... And so on.
Fon is a company. And as such, going forward, should be done with profits. It must decide how to spend money.
I believe that the first expense to be done increase the safety of Foneros. FON but prefers to spend money on advertising and to create new "useless" ... (See the fonera 2.0)
We are a community. So if I have to trust the other Foneros, FON has to trust first for me.
below instead of information that might be useful to someone.
not stretch how to build a serial adapter, go to the Fonera via a serial or anything like that. The Web is full of these documents and google was born for that.
FONERA BOOT OF A VIRGIN:
+ PHY ID is 0022:5521 Ethernet eth0: MAC address XX: XX: XX: XX: XX: XX IP: 0.0.0.0/255.255.255.255, Gateway: 0.0.0.0
Default server: 0.0.0.0
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version v1.3.0 - built 16:57:58, Aug 7 2006
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Board: ap51
RAM: 0x80000000-0x81000000, [0x80040450-0x80fe1000] available
FLASH: 0xa8000000 - 0xa87f0000, 128 blocks of 0x00010000 bytes each.
== Executing boot script in 1.000 seconds - enter ^C to abort
RIPRISTINARE LA CONFIGURAZIONE REDBOOT ORIGINALE:
RedBoot> fconfig
Run script at boot: true
Boot script:
.. fis load -l vmlinux.bin.l7
.. exec
Enter script, terminate with empty line
>> fis load -l vmlinux.bin.l7
>> exec>> Boot script timeout (1000ms resolution): 1 Use BOOTP for network configuration: false Gateway IP address: 0.0.0.0 Local IP address: 0.0.0.0 Local IP address mask: 255.255.255.255 Default server IP address: 0.0.0.0 Console baud rate: 9600 GDB connection port: 9000 Force console for special debug messages: false Network debug at boot time: false Update RedBoot non-volatile configuration - continue (y / n)? y ... Erase from 0xa87e0000-0xa87f0000:. ... Program from 0x81000000-0x80ff0000 0xa87e0000 at:. RedBoot>
PARTITIONS OF A VIRGIN FONERA 0.7.1.2:
RedBoot> fis list Name FLASH addr Mem addr Length Entry point RedBoot 0xA8000000 0xA8000000 0x00030000 0x00000000 0x00700000 0x00000000 rootfs 0xA8030000 0xA8030000 vmlinux.bin.l7 0xA8730000 0x000B0000 0x80041000 FIS directory 0x80041000 0x00000000 RedBoot config 0x0000F000 0xA87E0000 0xA87E0000 0xA87EF000 0xA87EF000 0x00001000 0x00000000
0.7.1.2 extract the firmware from the archive. FON: $ dd if =
fonera_0.7.1.2.fon fonera.tar.gz of = bs = 519 skip = $ 1 tar xzvf fonera.tar.gz
Reload firmware 0.7.1.2 ORIGINAL (TESTED WITH TFTP DOES NOT WORK WITH XMODEM):
RedBoot> ip_address-l-h 192.168.xx 192.168.XX/24 / * set the local ip-l,-h sets the ip tftpd server * / RedBoot> fis init RedBoot> load-r-b 0x80040450 rootfs.squashfs RedBoot> fis create-b 0x80040450-f 0xA8030000-l 0x00700000-e 0x00000000 rootfs RedBoot> load-r-b% {kernel} FREEMEMLO. lzma RedBoot> fis create-r 0x80041000-e 0x80041000 vmlinux.bin.l7 RedBoot> fis load-l vmlinux.bin.l7 RedBoot> exec SSH daemon PERMANENT:
root @ OpenWrt: ~ # mv / etc / init. d / dropbear / etc/init.d/S50dropbear root @ OpenWrt: ~ # cp / etc / firewall.user / etc / firewall.user.orig root @ OpenWrt: ~ # chmod-wx / etc / root firewall.user.orig @ OpenWrt: ~ # echo "iptables-t nat-A prerouting_rule-i $ WAN \\-p tcp - dport 22-j ACCEPT ">> / etc / firewall.user root @ OpenWrt: ~ # echo" iptables-A input_rule-i $ WAN \\-p tcp - dport 22-j ACCEPT ">> / etc / root firewall.user @ OpenWrt: ~ # reboot
gain control over his FONERA:
root @ OpenWrt: ~ # cp / bin / thinclient / bin / thinclient.orig root @ OpenWrt: ~ # chmod-wx / bin / Change the thinclient.orig 'last line of file / bin / thinclient. / Tmp / .thinclient.sh "to" mv / tmp / .thinclient.sh / tmp/thinclient.sh- $ (date '+% Y% m% d-% H% M') "
DECIDE WHEN SHARING ADSL:
# / bin / sh # # / bin / nofon # case "$ 1" in up) (up & & ifconfig tun0 ifconfig ath0 up & & \\ echo "Fon network is up!") file_copiato
WIRELESS CONTROL SIGNAL:
root @ OpenWrt: ~ # iwlist ath0 tx ath0 8 available transmit-powers ": 0 dBm (1 mW) 6 dBm (3 mW) 8 dBm (6 mW) 10 dBm (10 mW) 12 dBm (15 mW) 14 dBm (25 mW) 16 dBm (39 mW) 18 dBm (63 mW) Current Tx-Power = 18 dBm (63 mW) root @ OpenWrt: ~ # iwconfig ATH1 txpower Xdbm / * X can vary from 1 to 18. Value must be added to the power antenna 2dBm. * /
